We have been getting some feedback from our customers saying they seem to have problems getting a nice easy fit with the hull sections on occasions. Here are a few tips on how to get a good fit. 

      Firstly tape together the four hull sections as shown. ( pic 1) Then slide the one half into the other and glue together making sure no glue runs into the top/bottom joint  (pic 2). Once set you can separate the halves, clamp the last bit ( pic 3 ) that you didn’t get glue near and glue that to finish off. Job done, the top will now locate easily every time without having to force it.

This section contains images and instructions of how to install the conversion kit.